easyRESCUE DIVE - Pinpoint Electronics Ltd

The easyRESCUE DIVE is a small portable AIS SART unit worn on the dive vest. If the diver becomes separated from his / her buddy, or the dive group, the easyRESCUE DIVE unit may be activated on the water surface by the touch of a button. This will send out a distress alert to all AIS receivers in range.

easyRESCUE DIVE Brochure

Enquire About Product

Information

Key Points

The easyRESCUE-DIVE contains a GPS receiver which will fix the diver’s position within 35 seconds after activation. In addition to the GPS position, which is updated every minute, Course Over Ground (COG) and Speed Over Ground (SOG) information is transmitted as well as the specific unit’s ID.

These data will be received by every AIS-equipped vessel in the vicinity (including the dive boat). Radiation range depends on the height of the receiving antenna but ranges of 10 nautical miles or more are possible.

Operation

To use the unit just extend the antenna and press the ‘on’ button. To maximise transmission range, raise the unit as high as possible out of the water or, better still, use in conjunction with the ALERT BUOY.

Description: easyRESCUE-DIVE A040-D
Certification BSH: BSH / 4615 / 4361565 / 10 (for base unit easyRESCUE A040)
Radiation Power: 2 Watt
Waterproof: 100% down to 100 meter diving depth
Operation temperature: -20°C – 65°C
Dimensions: Length: 125mm | Width: 68mm | Height: 30mm
Weight: 380 Gram
Battery lifetime: 10 Years (unit has to be disposed properly)